.
~
...
Section 4 - Algorithms
FLANGER
00
- Flanger is a fat digital flanger. The DP
/4
offers
two
different flanger algorithms. This
flanger
has
deeper notches
and
requires less feedback
than
the EQ-Flanger-DDL algorithm.
The parameters available for this algorithm are:
01-Mix
02-Volume
See the descriptions
under
the Mix
and
Volume Parameters,
in
the
beginning
of this section. The
flange
depth
can be changed somewhat
by
changing the Mix level.
03 - Flanger LFO Rate Range:
00
to
99
This parameter controls the rate of modulation of the flanger notches.
04 - Flanger LFO Width
Range: 00 to
99
Controls the range of the
high
to
low
frequency
sweep
about
the flanger center
in
the
flanger
effect.
05 - Flanger Center Range: 00 to
99
This parameter controls the sweep center of the flanger effect.
06 - Flanger Regen Range: -99 to +99
This parameter controls the
amount
of feedback applied from the
output
to the
input
of the
flanger. The sign of the value determines the polarity of the feedback.
07 - Mod1 Source
08 - Mod1 Destination
09 - Mod1 Param Range Min
10 - Mod1 Param Range Max
11
- Mod2 Source
12 - Mod2 Destination
13 - Mod2 Param Range Min
14 - Mod2 Param Range Max
See
the
descriptions
under
the Algorithm Modulators
in
the
beginning
of this section .
ENSONIQ DP/4 Musician's Manual
107
To Next Page
Loading...
Need help?
General
