ENSONIQ DP/4 Musician's Manual

DP4
DP4
Section 6 - System-MIDI Mode
F ootsw itch 1 = !i
Controller
45 - DP/4 Foot Switch 1
46 - DP/4 Foot Switch 2 Ranges: (see the following list of Range)
Parameters 45 and 46 define how foot switch 1 and 2 will be used. These are the possible ranges:
DP/4 Controller Allows the foot switch to be used as a modulation source. This is the only
setting which allows the foot switch to be used for the tap-tempo feature in the
Increment Preset
Decrement Preset
Increment Song
Decrement Song
Song Preset Up
Song Preset Down
Not Used
Song Editor
47- Define Song
48-Step
49- Preset
Tempo Delay algorithm.
Selects next higher preset of the current preset type on the current unit(s).
Selects next lower preset of the current preset type on the current unit(s).
Selects next higher song.
Selects next lower song.
Selects next higher song step.
Selects next lower song step.
Ignores foot switch events.
Define Song 01
Step01=Preset000
Range: 01 to 20
Range: 01 to 05
Range: 000 to 099, Goto Step 1
Parameters 47 (Song), 48 (Step) and 49 (Preset) allow you to set up lists of presets that differ from
the
order they are stored in memory. This list is meant primarily for live performance and can
only be accessed by the foot switches.
There
are 20 songs available, each containing 5 steps that you can assign any preset (0-99) to.
Assign
your foot switch( es) to increment/ decrement through songs / steps to make use of this
feature.
For
more information about using the Song Editor parameters, refer to Section 8 - Applications.
ENSONIQ DP/4 Musician's Manual
145

ENSONIQ DP/4 Specifications

General

Brand	ENSONIQ
Model	DP/4
Category	Recording Equipment
Language	English