Section 4 - Algorithms
MULTI TAP DELAY
00
-
MultiTap
Delay
requires only one
ESP
chip, allowing the other three units to be free for
other algorithms. MultiTap Delay produces four
independent
controllable delays.
The
parameters
available for this algorithm are:
01-Mix
02-Volume
See
the
descriptions
under
the Mix
and
Volume Parameters,
in
the beginning of this section. This
algorithm
sounds
best
with
a Mix
of
wet
and
dry.
03 - MultiTap 1 Time
07 - MultiTap 2 Time
11
- MultiTap 3 Time
15 -
MultiTap 4 Time
Ranges: 0 to 1834
ms
These
four
parameters
set
the
amount
of delay time for the
independent
delays. Experiment
with
the different settings to find the
right
mix for
your
sound
source
and
application. Some
interesting effects
can
be
implemented
by
using a real time modulation controller for these
parameters.
04 - MultiTap 1 Level
08
- MultiTap 2 Level
12 - MultiTap 3 Level
16 - MultiTap 4 Level Ranges: 00 to 99
These
four
parameters
adjust the volume of the delayed signals against the original
dry
signal.
Levels of
00 will offer
no
audible delay.
ENSONIQ DP/4 Musician's Manual
73
To Next Page
Loading...
