ENSONIQ DP/4 - Page 108

92
Section 4 - Algorithms
09 - Rotating Speaker Distortion Tone Range: 000 to 127
This parameter is the distortion tone control. High settings will yield a more raspy distortion
tone, whereas
mid settings will give that "amp growl." When this parameter is set to Off, there is
no distortion.
10 - Rotating Speaker Stereo Spread Range: 00 to 99
This parameter controls the apparent width of the stereo image created by the rotating speaker
effect. A setting of 99 yields a right to left synthetic stereo spread, a setting of 00 yields a left to
right synthetic stereo spread, and a setting of 50 yields a mono signal.
11 - Mod1 Source
12 - Mod1 Destination
13 - Mod1 Param Range Min
14 - Mod1 Param Range Max
15 - Mod2
Source
16 - Mod2 Destination
17 - Mod2 Param Range Min
18 - Mod2 Param Range Max
See the descriptions under the Algorithm Modulators in the beginning of this section.
ENSONIQ DP/4 M ll sician's Manual