ENSONIQ DP/4 Musician's Manual

Parameter Reference
System-MIDI Parameters
00 MIDI Channel
01 MIDI Enable
02 Program Change
03 Program Change Map
04 Program Change-to-Preset Map Editor
05 Selects Preset
06
Unit Bypass
- 07 through 34 are identical to these parameters and
control units
B, C, D, and Config respectively.
35 MIDI Control Channel
36 MIDI Reception
37
DP/4 Controller 1
38
DP/4 Controller 2
39
DP/4 Controller 3
40 DP/4 Controller 4
41 DP/4 Controller 5
42
DP/4 Controller 6
43
DP/4 Controller 7
44
DP/4 Controller 8
45
DP/4 Foot Switch 1
46
DP/4 Foot Switch 2
47
Define Song
48
Define Step
49 Define Preset
50 MIDI System Exclusive ID
51 MIDI Sys Ex Reception
52
Preset Memory Protect
53 MIDI Prog Change Master Switch
54
Parameter Wrap Feature
.-,
55
Auto-load Preset (Select Mode)
56 Set All 1 U Preset Mixes To Wet
57 Receive Control 7 On Unit Chan
58 Send MIDI PrgChg & Controllers
59 Show 1 00 Config Presets
60 Data Entry Knob Response
61
Modulation Response Rate
62 Use Alternate ROM Presets
63 Operating System Version
System Exclusive Parameters
Soft Reset (without erasing the internal memory)
- While holding down the System-MIDI button,
- press the Unit A button.
Initializing the RAM Presets
- While holding down the System-MIDI button,
- press the Unit B button.
- Press the Write-Copy button to initialize all of the
RAM presets.
Reinitializing the DP/4
- While holding down the System-MIDI button,
• press the Unit B button.
- Press the Right Arrow button once.
• Press the Write-Copy button to reinitialize the
DP/4.
XII ENSONIQ DP/4 Musician's Manual
•

ENSONIQ DP/4 Specifications

General

Brand	ENSONIQ
Model	DP/4
Category	Recording Equipment
Language	English