ENSONIQ DP/4 - Page 62

46
Section 3 - Config Parameters
n'l
UC
02 - AB Unit Routing
~B Unit
[1=1+8]
Routing=
parallel
Range: serial, parallel, feedback1 or feedback2
Units A and B can be routed together in one of four different ways:
Input 1 1--,-1-)-'" Output 1
(Input 2)--.-f---l" r--""'"'I""'l-l-r~ Output 2
..... - ..
Input 1 --I A H B ~ Output 1
(Input 2)--1 HI.. __ ... ~ Output 2
Serial
Input 1
Input 2
J'';'\.
..
--=p
A
-
..r:-..
...
'"!
-
A
~
'--
B
-
-
Feedback 1 and 2
Parallel
Output 1
Output 2
• The difference between Feedback 1 and Feedback 2 is how the dry signal is mixed into the
wet signal:
B
Feedback
Feedback 1
03 - CD Unit Routing
D
Jry
"
A
J':'. Wet
1
..,
Feedback
Feedback 2
Unit Routing=
CD
[[#0]
feedback 1
DIV
"
B
J'~
I ..,-
Range: serial, parallel, feedback1 or feedback2
Units C and D can also be routed together in one of four ways. By combining parameters 01, 02,
and 03, there are 32 different ABeD routing possibilities.
Note: The difference between Feedback 1 and Feedback 2 is in the dry path only (as
shown above). Because we are not showing the dry path variations, there are only 18
different ABCD routing possibilities shown on the next page.
ENSONIQ DP/4 Musician's Manual