ENSONIQ DP/4 Musician's Manual

66
Section 4 - Algorithms
08 - HF Damping Range: 00 to 99
This parameter sounds best when set to low values. Its function is to filter out more and more
high frequency energy. For the most natural sounding reverse effect, we recommend a setting of
00.
09 - Diffusion 1
Range: 00 to 99
Diffusion 1 smears the input signal making a smoother sounding reverb. This parameter controls
the
high frequency ranges. For percussion sounds , high values are recommended.
10 - Diffusion 2 Range: 00 to 99
Similar to and in series with Diffusion I, this parameter controls lower frequency ranges.
11 - Decay Definition
Range: 00 to 99
The Decay Definition controls the rate at which echo density is increased with time. If set too
high, the echo density will
build at a rate that exceeds the decay rate. This can be used for a
special effect.
12 - Mod1 Source
13 - Mod1 Destination Parameter
14 - Mod1 Param Range Min
15 - Mod1 Param Range Max
16 - Mod2
Source
17 - Mod2 Destination Parameter
18 - Mod2 Param Range Min
19 - Mod2 Param Range Max
See the descriptions under the Algorithm Modulators, in the beginning of this section.
ENSONIQ DP/4 Musician's Manual
-

ENSONIQ DP/4 Specifications

General

Brand	ENSONIQ
Model	DP/4
Category	Recording Equipment
Language	English