78
Section 4 - Algorithms
07 - Right Input Delay Time
Range: 0 to 840
ms
Determines the
amount
of time between the original signal
and
the right
input
delay.
08 - Right Input Delay Time (fine)
Range: 0.00 to 0.99
ms
This parameter acts as a fine
tune
(in milliseconds) for
the
delay time between
the
original signal
and
the right
input
delay.
09 - Right Input Delay Regen
Range: 00 to
99
This parameter determines the
amount
of signal from
the
right
delay time
that
will
be
fed from
the
output
back into the input, increasing the
number
of repeats
in
the delay.
10 - Right Input Delay Pan Range: -99 to +99
This parameter determines the location of the right
input
delay
in
the stereo
spectrum
. A
value
of
-99
is
panned
far left, whereas +99 is far right.
11
- Dual Delay Cross Regen
Range: -99 to +99
This parameter allows
you
to feedback the
delayed
signals to their opposite sides
(if
both
delay
pans are set to opposite values); the left voice crosses to
the
right
voice,
and
the
right
voice
crosses to the left voice. A setting of +99 or -99 will cause infinite delay.
12 - Dual Delay Regen Damping Range: 00 to
99
Controls the cut off of a low pass filter
on
the feedback signal,
which
adjusts
the
amount
of
damping
to the feedback signals. The higher
the
number,
the
more
the signals are
dampened
.
13 - Mod1 Source
14 - Mod1 Destination
15 - Mod1 Param Range Min
16 - Mod1 Param Range Max
17 - Mod2
Source
18 - Mod2 Destination
19 - Mod2 Param Range Min
20 - Mod2 Param Range Max
See the descriptions
under
the Algorithm Modulators
in
the
beginning of this section.
ENSONIQ DP/4 Musician's Manual
To Next Page
Loading...
Need help?
General
