Entec EVRC2A-N6-NT - 6. SYSTEM SETUP

RECLOSER CONTROL EVRC2A-N6,NT http://www.entecene.co.kr
72
ENHANCED TECHNOLOGY
COMMUNICATION/ EVENT&ETC / BI Evt Mode
Range
ALL, LAST
Default
ALL
Step
~
Set the Binary Event Mode.
ALL : All status is buffed for the same point.
LAST : Only last event is buffed for the same point.
COMMUNICATION/ EVENT&ETC / AI Queue Size
Range
32,64,128,256
Default
256
Step
~
Set the Analog Queue Size.
COMMUNICATION/ EVENT&ETC / AI Evt Mode
Range
ALL, LAST
Default
ALL
Step
~
Set the Analog Event Mode.
ALL : All status is buffed for the same point.
LAST : Only last event is buffed for the same point.
COMMUNICATION/ EVENT&ETC / CI Queue Size
Range
32,64,128,256
Default
256
Step
~
Set the Counter Queue Size.
COMMUNICATION/ EVENT&ETC / CI Evt Mode
Range
ALL, LAST
Default
ALL
Step
~
Set the Counter Event Mode.
ALL : All Counter is buffed for the same point.
LAST : Only last event is buffed for the same point.
[EVENT&ETC]
> AI Evt Mode: ALL
> CI Queue Size: 256
> CI Evt Mode: ALL
[EVENT&ETC]
> AI Evt Mode: OFF
> CI Queue Size: 256
> CI Evt Mode: ALL
[EVENT&ETC]
> AI Evt Mode: ALL
> CI Queue Size: 256
> CI Evt Mode: ALL
[EVENT&ETC]
> BI Queue Size: 256
> BI Evt Mode: ALL
> AI Queue Size: 256
[EVENT&ETC]
> BI Queue Size: 256
> BI Evt Mode: ALL
> AI Queue Size: 256