Eppendorf Xplorer - Page 28

28
Operation
Eppendorf Xplorer
®
/Eppendorf Xplorer
®
plus
English (EN)
Set volume/step
Volume per dispensing step. The
maximum number of aspiration steps
(Steps) will be displayed when the Set
volume/step is changed.
Aspiration speed
Aspiration speed
8 levels are available. The higher the
numerical value, the higher the speed.
Aspiration speed will be automatically
and approximately used for the
blow-out (Blow).
Dispensing speed
Dispensing speed
8 levels are available. The higher the
numerical value, the higher the speed.
Dispensing speed will be automatically
and approximately used for the
blow-out (Blow).
Set time
Interval between the dispensing step
(0.1 s to 10 s).
Display Parameter Mode
Ads Dis Pip P/M Man