Epson C8-B - Page 31

C8-B/C12-B Service Manual Maintenance Information Disclosure Scope: Maintenance Trained Personnel Only
(C) Seiko Epson Corporation 1-25 Rev.1
Inject grease from the grease nipple using a grease gun.
SK-2: 0.5 g
CAUTION
Be careful not to mix with the grease used in the Joint #5 (SK-1A).
Remove the grease nipple from the Joint #6 grease inlet.
Attach the grease plug to the Joint #6 grease inlet.
POINT
If the grease plug is damaged or deteriorated, replace it with a new one.
3
Grease Gun
4
5