Epson ES-C380W - Page 112

Remove Background:
Remove the background color of the originals from the scanned image.
To use this feature, the background color of the originals should be the lightest color in the originals,
and should be uniform. is feature is not applied correctly if there are patterns in the background,
or there are text or illustrations which are a lighter color than the background.
Remove Shadow:
Remove the shadows of the original that appear in the scanned image.
❏ Frame:
Remove the shadows at the edge of the original.
Correct Document Skew:
Correct skew in the scanned image.
is feature may not be able to correct documents that have been over skewed.
Skip Blank Pages:
Skip blank pages when scanning if there are any in the originals.
If the result is not what you expected, adjust detection level.
Note:
❏ Some pages may be incorrectly skipped as blank pages.
❏ is feature is not available when scanning double-sided originals that are stitched.
Automatic Feeding Mode:
Set Automatic Feeding Mode. is feature allows you to continue scanning automatically aer the
originals are scanned. is feature is useful when scanning dierent sizes or types of originals one by
one.
Adjust the edge guides of the scanner before placing each original.
❏ On (Full-Auto):
Start scanning when an original is set while the continuation
conrmation
message is displayed.
❏ On (Semi-Auto):
Start scanning when the Start Scanning button is pressed while the continuation conrmation
message is displayed.
Detect Double Feed:
Display a warning when multiple originals are fed at the same time.
❏ Length:
Detect a double feed by the length. When the length of the second original scanned is
dierent
from the rst, this is identied as a double feed. You can specify the dierence in length for
detection.
Clear All Settings
Resets the scan settings to their defaults.
Scanning > Scanning from the Control Panel (the Scan to Features) > Sending to the Cloud
112