Inserting and Removing a USB Drive
Inserting a USB Drive
Insert a USB drive into the external interface USB port.
Related Information
& “Scan to USB Drive Feature Work Flow” on page 100
Removing a USB Drive
Remove a USB drive.
c
Important:
❏ If you remove the USB drive device while transferring data to the scanner, the data on the USB drive may be lost.
❏ While transferring data, a message is displayed on the control panel.
Also, backup the data in external storage device to another media as necessary.
e data may be lost or corrupted in the following situations:
❏ When aected by static electricity or electrical noise
❏ When used incorrectly
Scanner Basics
>
Inserting and Removing a USB Drive
>
Removing a USB Drive
26