Epson ES-C380W - Creating a Network Folder

Creating a Network Folder
Create a network folder on your computer. e computer must be connected to the same network as the scanner.
e
method to set the network folder varies depending on the environment.
is
is an example of creating a
network folder on the desktop of a computer under the following environment.
❏ Operating system: Windows 10
❏ Location for creating shared folder: Desktop
❏ Folder path: C:\Users\xxxx\Desktop\scan_folder (create a network folder called "scan_folder" on the desktop)
1. Log in to the computer on which you want to create the network folder with a user account that has
administrator authority.
Note:
If you do not know which user account has administrator authority, check with your computer administrator.
2. Make sure that the device name (computer name) does not contain double-byte characters. Click the Windows
Start button, and then select
Settings > System > About.
Note:
If there are double-byte characters in the device name, le saving may fail.
3. Check that the string displayed in Device Specications > Device Name does not contain any double-byte
characters.
ere should be no issues if the device name contains only single-byte characters. Close the screen.
Example: EPSPUB313
c
Important:
If the device name contains double-byte characters, use a computer that does not use double-byte characters or
rename the device.
If you need to change the device name, make sure you check with your computer administrator in advance as it
may aect computer management and access to resources.
Required Settings for Scanning > Creating a Network Folder
140