Epson ES-C380W - Disabling WSD Scan; Monitoring a Remote Scanner; Checking Information for a Remote Scanner

3. Click Next.
e setting conrmation screen is displayed.
4. Click OK.
Related Information
& “How to Run Web
Cong
in a Web Browser” on page 36
Disabling WSD Scan
Note:
You can also make settings on the scanner's control panel. Select Settings >System Administration > WSD Settings.
If you do not want your computer to congure the scanner as a WSD scanning device, follow the steps below to
disable the WSD settings.
1. Access Web Cong, and then select the Network Security tab > Protocol.
2. In WSD Settings, clear the Enable WSD check box.
3. Click Next.
e setting conrmation screen is displayed.
4. Click OK.
Related Information
& “How to Run Web Cong in a Web Browser” on page 36
Monitoring a Remote Scanner
Checking Information for a Remote Scanner
You can check the following information of the operating scanner from Status by using Web
Cong
.
❏ Product Status
Check the status, product number, MAC address, etc.
❏ Network Status
Check the information of the network connection status, IP address, DNS server, etc.
❏ Usage Status
Check the
rst
day of scanning, scanning count, and so on.
❏ Hardware Status
Check the status of each function of the scanner.
❏ Panel Snapshot
Displays a snapshot of the screen displayed on the scanner's control panel.
Administrator Information > Monitoring a Remote Scanner > Checking Information for a Remote Scanner
246