Epson ES-C380W - Scan to Email Feature Work Flow; Scan to Network Folder;Ftp Feature Work Flow

*Epson Connect services are subject to change without notice.
Scan to Email Feature Work Flow
ere are two ways you can send scanned images to a specied email address; by setting up an email server or by
using the Epson Connect cloud service.
“To Send by Email” on page 99
e following explains how to setup an email server to send scanned images by email.
Necessary Operations Operation
Location
Explanations
1. Connect the scanner to the network
(This is unnecessary if you connected
to the network during setup)
Scanner and
computer
Connect the scanner to the network using the installer.
Access the following website, and then enter the product
name on the screen displayed. Go to Setup, and then start
setting up.
https://epson.sn
When the connection method selection screen is displayed,
select wireless LAN (Wi-Fi) and follow the on-screen
instructions to connect to the network.
Note:
❏ When you use the installer, the
soware
is installed at
the same time.
❏ You can also set this manually. (for administrators)
“Connecting the Scanner to the Network” on page 236
2. Register your email server
information to the scanner
Computer (Web
Cong) or the
scanner’s control
panel
The Scan to Email feature allows you to send scanned
images through an email server. Register the email server
information to the scanner.
“Registering an Email Server” on page 146
3. Check the email server connection Computer (Web
Cong) or the
scanner’s control
panel
Test the email server connection.
“Checking an Email Server Connection” on page 148
4. Register the recipient's email
address in Contacts
Computer (Web
Cong) or the
scanner’s control
panel
Register the recipient's email address in the scanner’s
Contacts. This allows you to select the recipient from
Contacts without having to enter their email address when
scanning.
“Registering a Destination (Email)” on page 150
5. Scan from the control panel Scanner’s control
panel
Perform scanning from the control panel.
“Scanning Originals to an Email” on page 113
Scan to Network Folder/FTP Feature Work Flow
is section uses making settings for Network Folder (SMB) as an example.
Scanning > Preparing to Scan from the Control Panel (the Scan to Features) > Scan to Network Folder/FTP Feature Wo …
102