Standards and Approvals for European Models
Product and AC adapter
For European users
Hereby, Seiko Epson Corporation declares that the following radio equipment models are in compliance with
Directive 2014/53/EU. e full text of the EU declaration of conformity is available at the following website.
http://www.epson.eu/conformity
J441D
A461H, A462E
For use only in Ireland, UK, Austria, Germany, Liechtenstein, Switzerland, France, Belgium, Luxembourg,
Netherlands, Italy, Portugal, Spain, Denmark, Finland, Norway, Sweden, Iceland, Croatia, Cyprus, Greece,
Slovenia, Malta, Bulgaria, Czech, Estonia, Hungary, Latvia, Lithuania, Poland, Romania, and Slovakia.
Epson cannot accept responsibility for any failure to satisfy the protection requirements resulting from a non-
recommended
modication
of the product.
Standards and Approvals for Australian Models
Product
EMC AS/NZS CISPR32 Class B
Epson hereby declares that the following equipment Models are in compliance with the essential requirements and
other relevant provisions of AS/NZS4268:
J441C
Epson cannot accept responsibility for any failure to satisfy the protection requirements resulting from a non-
recommended
modication
of the product.
AC adapter (A461H)
EMC AS/NZS CISPR32 Class B
Standards and Approvals for U.S. Models
Product
EMC FCC Part 15 Subpart B Class B
CAN ICES-3 (B)/NMB-3 (B)
is
equipment contains the following wireless module.
Standards and Approvals
>
Standards and Approvals for U.S. Models
288
To Next Page
Loading...
Need help?
General
