Changing from USB to a Network Connection
Using the installer and re-set up in a dierent connection method.
Access the following website, and then enter the product name. Go to Setup, and then start setting up.
https://epson.sn
Selecting Change the Connection Methods
Follow the instructions in each window. On the Select Install Option screen, select Set up Scanner connection
again (for new network router or changing USB to network, etc.) , and then click Next.
Select Connect via wireless network (Wi-Fi), and then click Next.
Follow the on-screen instructions to
nish
setup.
Making Wi-Fi Settings from the Control Panel
You can make network settings from the scanner's control panel in several ways. Choose the connection method
that matches the environment and conditions that you are using.
If you know the information for the wireless router such as SSID and password, you can make settings manually.
If the wireless router supports WPS, you can make settings by using push button setup.
Aer connecting the scanner to the network, connect to the scanner from the device that you want to use
(computer, smart device, tablet, and so on.)
Related Information
& “Connecting the Scanner to the Network” on page 236
Checking the Network Connection Status
You can check the network connection status in the following way.
Checking the Network Connection Status from the Control Panel
You can check the network connection status using the network icon or the network information on the scanner’s
control panel.
Adding or Replacing the Computer or Devices
>
Checking the Network Connection Status
>
Chec
…
232
To Next Page
Loading...
Need help?
General
