Epson ES-C380W - Resetting the Number of Scans after Replacing the Rollers; Energy Saving

11. Reset the scan number on the control panel.
Note:
Dispose of the pickup roller and the separation roller following the rules and regulations of your local authority. Do not
disassemble them.
Related Information
& “Roller Assembly Kit Codes” on page 41
Resetting the Number of Scans After Replacing the Rollers
Reset the number of scans using the control panel or Epson Scan 2 Utility
aer
replacing the roller assembly kit.
is section explains how to reset using the control panel.
1. Tap Scanner Maintenance on the home screen.
2. Tap Roller Replacement.
3. Tap Reset the Number of Scans.
4. Tap Ye s .
Note:
To reset from the Epson Scan 2 Utility, start the Epson Scan 2 Utility, click the Counter tab, and then click Reset in Roller
Assembly Kit.
Related Information
& “Replacing the Roller Assembly Kit” on page 182
Energy Saving
You can save energy by using the sleep mode or auto power o mode when no operations are performed by the
scanner. You can set the time period before the scanner enters sleep mode and turns o automatically. Any
increase will aect the product’s energy eciency. Please consider the environment before making any changes.
1. Select Settings on the home screen.
2. Select Basic Settings.
3. Select Sleep Timer or Power O Settings, and then make settings.
Note:
Available features may vary depending on the location of purchase.
Maintenance > Energy Saving
190