Epson ES-C380W - Updating Firmware Without Connecting to; The Internet

1. Access Web Cong and select the Device Management tab > Firmware Update.
2. Click Start, and then follow the on-screen instructions.
e rmware conrmation starts, and the rmware information is displayed if the updated rmware exists.
Note:
You can also update the rmware using Epson Device Admin. You can visually conrm the rmware information on the
device list. It is useful when you want to update multiple devices' rmware. See the Epson Device Admin guide or help for
more details.
Related Information
& “Application for
Conguring
Scanner Operations (Web
Cong
)” on page 36
Updating Firmware without Connecting to the Internet
You can download the device's rmware from Epson website on the computer, and then connect the device and the
computer by USB cable to update the rmware. If you cannot update over the network, try this method.
Note:
Before updating, make sure that the scanner driver Epson Scan 2 is installed on your computer. If Epson Scan 2 is not
installed, install it again.
1.
Check the Epson website for the latest rmware update releases.
http://www.epson.com
❏ If there is the rmware for your scanner, download it and go to the next step.
❏ If there is no
rmware
information on the website, you are already using the latest
rmware.
2. Connect the computer that contains the downloaded rmware to the scanner by USB cable.
3.
Double-click the downloaded .exe
le.
Epson Firmware Updater starts.
4. Follow the on-screen instructions.
Maintenance > Updating Applications and Firmware > Updating Firmware without Connecting to the Internet
194