Epson ES-C380W - Disabling the External Interface; Disabling Network Scanning from Your Computer

& “How to Run Web Cong in a Web Browser” on page 36
Disabling the External Interface
You can disable the interface that is used to connect the device to the scanner. Make the restriction settings to
restrict scanning other than via network.
Note:
You can also make the restriction settings on the scanner's control panel.
PC Connection via USB : Settings > Basic Settings > PC Connection via USB
1. Access Web Cong and select the Product Security tab > External Interface.
2. Select Disable on the functions you want to set.
Select Enable when you want to cancel controlling.
PC Connection via USB
You can restrict the usage of the USB connection from the computer. If you want to restrict it, select Disable.
3. Click OK.
4. Check that the disabled port cannot be used.
PC Connection via USB
If the driver was installed on the computer
Connect the scanner to the computer using a USB cable, and then conrm that the scanner does not scan.
If the driver was not installed on the computer
Windows:
Open the device manager and keep it, connect the scanner to the computer using a USB cable, and then
conrm that the device manager's display contents stays unchanged.
Mac OS:
Connect the scanner to the computer using a USB cable, and then conrm that you cannot add the scanner
from Printers & Scanners.
Related Information
& “How to Run Web Cong in a Web Browser” on page 36
Disabling Network Scanning from your Computer
You can make the following settings in Web
Cong
to disable network scanning using EPSON Scan from your
computer.
1. Access Web Cong, and then select the Scan tab > Network Scan.
2. In EPSON Scan, clear the Enable scanning check box.
Administrator Information > Disabling Network Scanning from your Computer
245