*3 The leading edge of the original must be placed at the binding part of the Carrier Sheet when scanning an original
approximately 297 mm (11.7 in.) long. Otherwise, the length of the scanned image may be longer than intended as the
scanner scans to the end of the Carrier Sheet when you select Auto Detect as the Document Size setting in the
application.
When Scanning Using a Carrier Sheet (Check the Position of the Scanner)
When scanning using a Carrier Sheet, scan in the straight path position.
Related Information
& “Carrier Sheet Codes” on page 40
& “Placing Irregular Shaped Originals” on page 90
Scannable Envelopes
ese
are the
specications
for envelopes that you can scan.
Specications Size Thickness Loading Capacity
C6 114×162 mm (4.49×6.38 in.)
(standard size)
0.38 mm (0.015 in.) or less 1 envelope
DL 110×220 mm (4.33 x 8.66
in.)
(standard size)
When Scanning Envelopes (Check the Position of the Scanner)
When scanning envelopes, scan in the straight path position.
Related Information
& “Placing an Envelope” on page 86
Placing Originals
>
Specications for Originals that can be Scanned
>
Scannable Envelopes
51