Epson ES-C380W - Page 103

Necessary Operations Operation
Location
Explanations
1. Connect the scanner to the network
(This is unnecessary if you connected
to the network during setup)
Scanner and
computer
Connect the scanner to the network using the installer.
Access the following website, and then enter the product
name on the screen displayed. Go to Setup, and then start
setting up.
https://epson.sn
When the connection method selection screen is displayed,
select wireless LAN (Wi-Fi) and follow the on-screen
instructions to connect to the network.
Note:
❏ When you use the installer, the soware is installed at
the same time.
❏ You can also set this manually. (for administrators)
“Connecting the Scanner to the Network” on page 236
2. Create a network folder Computer Create a folder to save the scanned image. Create a folder on
a computer on your network, and then set the folder to be
shared.
“Creating a Network Folder” on page 140
3. Register the folder in Contacts Computer (Web
Cong) or the
scanner’s control
panel
Register the created network folder in the scanner's
Contacts. This allows you to select the destination from
Contacts without having to enter the destination folder path
when scanning.
“Registering a Destination (Network Folder (SMB))” on
page 151
Note:
See the following for FTP and SharePoint (WebDAV)
setting items.
“Registering a Destination (FTP)” on page 152
“Registering a Destination (SharePoint(WebDAV))” on
page 153
4. Scan from the control panel Scanner’s control
panel
Perform scanning from the control panel.
“Saving to a Network Folder” on page 117
Scanning > Preparing to Scan from the Control Panel (the Scan to Features) > Scan to Network Folder/FTP Feature Wo …
103