11. Wipe the separation roller. Wipe with a so, lint-free cloth dampened with a small amount of dedicated
cleaner or water.
c
Important:
Use only a moist cloth to clean the roller. Using a dry cloth may damage the surface of the roller.
12. Install the separation roller.
See “Replacing the Roller Assembly Kit” for more details on installing.
13. Wipe o any stains on the pickup roller. Open the cover, and then remove the pickup roller.
See “Replacing the Roller Assembly Kit” for more details.
“Replacing the Roller Assembly Kit” on page 182
Maintenance
>
Cleaning Inside the Scanner
180
To Next Page
Loading...
