This is displayed when a rmware update is available.
Select it to update the rmware to improve the scanner's features. We recommend using the scanner
with the latest version of the rmware.
Displays the network connection status.
Select the icon to check and change the current settings. This is the shortcut for the following menu.
Settings > Network Settings > Wi-Fi Setup
The scanner is not connected to a wireless (Wi-Fi) network.
The scanner is searching for SSID, unset IP address, or having a problem with a wireless (Wi-Fi)
network.
The scanner is connected to a wireless (Wi-Fi) network.
The number of bars indicates the signal strength of the connection. The more bars there are, the
stronger the connection.
The scanner is not connected to a wireless (Wi-Fi) network in Wi-Fi Direct (Simple AP) mode.
The scanner is connected to a wireless (Wi-Fi) network in Wi-Fi Direct (Simple AP) mode.
Indicates that the scanner is in the vertical path position.
Indicates that the scanner is in the straight path position.
Returns to the previous screen.
Indicates that there is additional information. Select the icon to display the message.
Indicates a problem with the items. Select the icon to check how to solve the problem.
❏ Roller Replacement: The number of scans exceeds the life cycle of the rollers. Replace the rollers.
❏ Glass Cleaning: Dirt has been detected on the glass surface inside the scanner. Clean the inside of
the scanner.
❏ Regular Cleaning: It is time to clean inside the scanner.
Touch Screen Operations
e touchscreen is compatible with the following operations.
Tap Press or select the items or the icons.
Scanner Basics
>
Control Panel
>
Guide to the LCD Screen
30
To Next Page
Loading...
