Epson SC-F2000 - Page 202

SC-F2000 Revision C
ADJUSTMENT Overview 202
Confidential
[Blue]: Button or menu name on the program screen / [Black]: Button or menu name on the operation panel of the printer
Power Supply Board
Replacement 1 Replace with a new one.
---
√√
p. 99
After
replacement
2 Turn the power on in normal mode. ---
√
---
3 TF Motor measurement
√
√
--- p. 282
4 IS Motor measurement
√√
--- p. 282
5 CR Motor measurement √
√
--- p. 282
6 Make the replacement date & time setting.
√√
--- p. 277
Main B Board
(Network Board)
Replacement 1 Replace with a new one.
---
√√
p. 97
After
replacement
2 Turn the power on in normal mode. ---
√
---
3 Install the firmware for the network board.
---
Remote Panel 2
√
---
4 Turn the power on in Serviceman mode.
---
√
---
5 MAC Address input
√√
--- p. 274
Table 4-1. Adjustment Items and the Order by Repaired Part
Replaced or Repaired
(Reattached) Part/Unit
Required Operations
Service
Program
Jig Media Replaced Reattached Page