SC-F2000 Revision C
MAINTENANCE Lubrication 297
Confidential
[Lubrication 7] [Lubrication 8]
Part Name Driven Pulley Holder
Lubricants (Part Code) G-71 (1480655)
Amount φ 2 mm × 2 mm × 2 points
Lubrication Tool φ 2 mm injector
Lubrication Manner
Apply the lubricate on the portion where it contacts with the Driven
Pulley.
Note Be careful not to apply the lubricant beyond the specified point.
Driven Pulley Holder
Driven Pulley
Lubrication Points
Part Name TF Shaft
Lubricants (Part Code) G-84 (1516265)
Amount φ 2 mm × 8 mm × 8 points
Lubrication Tool φ 2 mm injector
Lubrication Manner
Lubricate on the midpoint of the posts, then spread the lubricant entirely
with a waste cloth.
Note Be careful not to apply the lubricant beyond the specified point.
TF Shaft
Lubrication Points
Lubrication Points
To Next Page
Loading...
