Stylus Photo R1900/R2880/R2000/R2000s/SC-P400 Series Revision I
SC-P400 Series Features 203
Note *1: The cartridge LED corresponding to each ink cartridge lights.
*2: After the setting succeeds, LED is turned on for 5 minutes, and turned off.
*3: In the waste ink pad near full state, the LED indication on the panel does not change.
Note : -- : No change
Flash: Repeats turning On and Off every 1.25 seconds.
Flash 2: Repeats On for 0.5 seconds, Off for 0.5 seconds,
On for 0.5 seconds, and Off for 1.0 second.
Flash 3: Repeats Off for 0.5 seconds, On for 0.5 seconds,
Off for 0.5 seconds, and On for 1.0 second.
Flash 4: Repeats On for 2.0 seconds and Off for 0.5 seconds.
Flash at high speed: Repeats turning On and Off every 0.5 seconds.
Flashes alternately 1: Same as the “Flash”
Flashes alternately 2: Repeats turning Off and On every 1.25 seconds.
Maintenance request
(waste ink pad end)
OFF
Flashes
alternately2
Flashes
alternately1
-- -- 5
Front guide error
--
Flashes at
high speed
Fhashes2 -- -- 6
Cover open error -- -- Flashes -- -- 7
Paper (CDR) jam -- -- Flashes -- -- 7
Paper path error -- -- Flashes -- -- 7
CDR tray error -- -- ON -- -- 8
No paper error -- -- ON -- -- 8
Roll end error -- -- ON -- -- 8
Multi-feed error -- -- ON -- -- 8
During ink scrambling
sequence
Flashes3 -- -- -- -- 9
Ink cartridge replacement
is in progress
Flashes -- -- -- -- 10
Ink sequence is in progress Flashes -- -- -- -- 11
No ink cartridge or ink-out
error
-- Flashes
*1
-- -- -- 12
CSIS error -- Flashes
*1
-- -- -- 12
Ink color error
--
Flashes at
high
speed
*1
-- -- -- 13
During printing Flashes -- -- -- -- 14
Access point setting error
(Security key exchange)
-- -- -- --
Flashes at
high speed
14
Access point setting error
(General)
-- -- -- -- Flashes 14
Access point setting error
(Registration)
-- -- -- -- Flashes 14
Access point setting error
(PINCODE authentication)
-- -- -- -- Flashes 14
Success Wireless LAN
setting
-- -- -- -- ON
*2
14
Cannot set Wireless LAN -- -- -- -- Flashes 14
During push-button setting
-- -- --
Flashes
alternately2
Flashes
alternately1
14
During PINCODE setting
-- -- --
Flashes
simultaneou
sly
Flashes
simultaneou
sly
14
During receiving data Flashes -- -- Flashes -- 14
Table 9-5. Indicators (LEDs) Function
Printer status
Indicators (LEDs)
Priority
*1
Power Ink Paper NW1 NW2
Network initialization start
(LED ON)
-- -- -- ON ON 14
Network initialization start
(LED OFF)
-- -- -- OFF OFF 14
State of initialization start
-- -- --
Flashes
alternately2
Flashes
alternately1
14
Without network
connection
-- -- -- OFF -- 14
During Wireless LAN
connection (having IP)
-- -- -- ON -- 14
During Wired LAN
connection (having IP)
-- -- -- OFF OFF 14
Ink low -- Flashes
*1
-- -- -- 15
During power ON
sequence
Flashes -- -- -- -- 16
During stand-by state ON -- -- -- -- 17
Waste ink pad near full -- -- -- -- --
*3
Table 9-5. Indicators (LEDs) Function
Printer status
Indicators (LEDs)
Priority
*1
Power Ink Paper NW1 NW2