Epson Stylus Photo R2000 Series User Manual

EPSON Stylus Photo R1900/R2880/R2000/R2000s/SC-P400 Series Revision I
Operating Principles PG Setting 33
2.4 PG Setting
As this printer uses an Auto PG (APG), an appropriate PG position is set according to the used paper type.
The following table indicates the PG positions, the main applications of each position, and the relationships between the two sensors used with the APG.
Note "*": The signal output is “High” while the PG positions are changed.
Table 2-4.
Application
PG Position
PG (– –) PG (–) PG (Typ) PG (+) PG (++) Release
Printing • Photo paper
(A4,Letter)
• Roll paper
• Photo Matte paper
• Plain paper
• Exclusive paper
• PG (-) rub avoidance
• Envelope
• PG (Typ) rub avoidance
• CD/DVD
–
Non-printing
– –
• Standby position after
power-on (When the
CDR Tray Base is
closed.)
• At power-off
• Ink Mark Sensor reading.
(Auto Bi-D)
• Ink Mark Sensor reading.
(Detection of dot
missing)
• Initialization at power-on
• Cleaning (wiping)
• Ink Cartridge
replacement
• Standby state for CD/
DVD feeding
• Paper jam removal
PG value 1.05mm 1.20mm 1.70mm 2.10mm 4.50mm –
Sensor PG (– –) PG (–) PG (Typ) PG (+) PG (++) Release
APG Sensor 1* Low Low Low Low Low Low
APG Sensor 2 Low Low Low Low High High

Epson Stylus Photo R2000 Series Specifications

General

Print Technology	Inkjet
Max Print Resolution	5760 x 1440 optimized dpi
Number of Ink Colors	8
Borderless Printing	Yes
Operating Systems	Windows, Mac OS
Ink Type	UltraChrome Hi-Gloss 2
Ink Colors	Cyan, Magenta, Yellow, Red, Orange, Matte Black, Photo Black, Gloss Optimizer
Ink Droplet Size	1.5 picoliters
Connectivity	USB, Ethernet, Wi-Fi
Media Sizes Supported	4" x 6", 5" x 7", 8" x 10", 11" x 14", 13" x 19"
Media Types Supported	Plain paper, photo paper, fine art paper, canvas
Interface	USB, Ethernet