114
10.4.5.2.5.1.3 Button
When the “Generate” button is pressed, Web Config displays a pop-up window with the following message if it recognizes an
error in the entered value.
Table 10-110 Button
Table 10-111 Error Pop-up
10.4.5.2.5.2 Result Page
After the Generate CSR button is pressed, Web Config goes to the Result page.
10.4.5.2.5.2.1 Image
Figure 10-50 Result Page
10.4.5.2.5.2.2 Setting Result
Table 10-112 Setting Result
10.4.5.2.6 Download CSR(Certificate Signing Request)
This page is shown after ‘Download’ for importing in the CSR settings is pressed.
The default name of the downloaded file is in the form of “EXPORT_CSR_<Serial Number>_<Date and Time>”.
<Serial Number> is the Product’s Serial Number.
<Date and Time> is the Date and Time set for the product.
The method of downloading the CSR varies by Web browser.
Button for generating CSR at the bottom of the main frame.
Button at the bottom of the main frame for going back to the top
page of the certificate settings.
"Invalid value below. ¥n -%s¥n -%s¥n…"
Shows a warning when a value is entered incorrectly.
This message is shown when the settings are completed.
This message is shown if the settings fail.
Setting Result
To Next Page
Loading...
Need help?
General