148
10.6.2.5 Result Page
10.6.2.5.1 Image
Figure 10-71 Result Page
10.6.2.5.2 Setting Result
Table 10-190 Result
"Do not turn the product off."
"When the update is complete, the product turns off and
on automatically.¥n
If you turn the product off while updating, it may
function abnormally. Restart the Web Config on browser
This message is shown when Firmware update is started
successfully.
! icon is shown in front of "Do not turn the product off.".
"The firmware update was canceled."
This message is shown when Firmware update is canceled
successfully.
"You have the latest firmware."
This message is shown when the current version of the
firmware is latest.
"Cannot connect to the Epson server."
This message is shown when the printer could not access to the
server.
The X icon is shown in front of the string.
"Cannot update the firmware."
"Quit printing or scanning."
"Remove the roll paper if loaded."
"When an error message appears on the screen or status
lights indicate an error, solve the problem."
"Note: There might be an error regarding the
consumables such as ink supply units."
"Connect an AC adapter if not connected."
"Remove the memory card."
"If the problem is not solved, close the Web browser and
This message is shown when the printer cannot update the
firmware.
The X icon is shown in front of "Cannot update the firmware.".
"Remove the roll paper if loaded." is shown on destinations with
Roll Paper Feed.
"Another computer may be communicating with the
This message is shown when another computer may be
communicating with the product.
The X icon is shown in front of "The operation failed.".
"Cannot update the firmware."
"Low battery. Connect to a power source."
This message is shown when cannot be executed because the
power is not connected and the battery level is low.
The X icon is shown in front of "Cannot update the firmware.".
Setting Result
To Next Page
Loading...
Need help?
General