Epson TM-P20II

48
10.2 Print
10.2.1 Print Settings
10.2.1.1 Top Page
10.2.1.1.1 Image
The following figure shows the layout of the top page.
Figure 10-4 Image
10.2.1.1.2 Setting Items
Table 10-13 Setting Items
Items
Description
Condition
"Paper Reduction"
Use the drop-down list to select from the
following options:
"Max" / "Recommendation" / "None"
Display only on models that
support paper reduction
"Printing Control"
Title
-
"Printing Speed"
For models that support the maximum
printing speed "Level10"
Use the drop-down list to select from the
following options:
"Level1 (slow)" / "Level2" / "Level3" /
"Level4" / "Level5" / "Level6" / "Level7" /
"Level8" / "Level9" / "Level10 (fast)"
For models that support the maximum
printing speed "Level13"
Use the drop-down list to select from the
following options:
"Level1 (slow)" / "Level2" / "Level3" /
"Level4" / "Level5" / "Level6" / "Level7" /
"Level8" / "Level9" / "Level10" / "Level11" /
"Level12" / "Level13 (fast)"
For models that support the maximum
printing speed "Level17"
Use the drop-down list to select from the
following options:
"Level1 (slow)" / "Level2" / "Level3" /
"Level4" / "Level5" / "Level6" / "Level7" /
"Level8" / "Level9" / "Level10" / "Level11" /
"Level12" / "Level13" / "Level14" / "Level15"
/ "Level16" / "Level17 (fast)"
Displayed only on models
that support print speed
"Print Density"
A value can be chosen using the
Drop-down list from the following options:
"70%" / "75%" / "80%" / "85%" / "90%" /
"95%" / "100%" / "105%" / "110%" / "115%"
/ "120%" / "125%" / "130%"
Display only on models that
support Print Density
Setting Items
Button