Epson TM-P20II

29
9.6.1.3 Buttons
The following table shows the button on the page.
Table 9-16 Buttons
If the Web Config recognizes an error in the input value after the “OK” button is pressed, the following reboot confirmation
pop-up is shown.
Table 9-17 Reboot Confirmation Pop-up

"Print Density"
Use the drop-down list to select from the
following options:
"70%" / "75%" / "80%" / "85%" / "90%" /
"95%" / "100%" / "105%" / "110%" / "115%"
/ "120%" / "125%" / "130%"
Displayed only on models
that support Print Density
"Command execution during offline"
User can select "Enable" / "Disable" by
radio button.
Displayed only on models
that support command
execution during offline
"Power saving function for USB"
User can select "Enable" / "Disable" by
radio button.
Displayed only on models
that support the USB power
saving function
"Buzzer"
Title
-
"Buzzer"
User can select "Optional Buzzer" /
"Disable" by radio button.
This item is displayed on
devices with a buzzer.
"When an erro occurs"
Use the drop-down list to select from the
following options:
"Off" / "Once" / "Continuous"
* "Continuous" is displayed only for
compatible models.
This item is displayed on
devices with a buzzer.
"When auto paper cut is operating"
User can select "Off" / "Continuous" by
radio button.
This item is displayed on
devices with a buzzer when
performing automatic
paper cut.
"When paper end occurs"
User can select "Off" / "Once" by radio
button.
This item is displayed on
devices with a buzzer when
paper end occurs.
"When battery level changed"
User can select "Off" / "Once" by radio
button.
This item is displayed on
devices with a buzzer when
the battery level changes.
"When specified pulse 1 (2 pin) occurs"
User can select "Off" / "Once" by radio
button.
This item is displayed on
devices with a buzzer when
specified pulse 1 (2 pin)
occurs.
"When specified pulse 2 (5 pin) occurs"
User can select "Off" / "Once" by radio
button.
This item is displayed on
devices with a buzzer when
specified pulse 2 (5 pin)
occurs.
Items
Description
"Back"
Button to move to the main page.
"OK"
Button to start print settings. Press the button to display
the reboot confirmation pop-up
Items
Description
"Product will be restarted to apply the settings."
Displayed when the "Set" button is pressed. Click the
"OK" button in the pop-up to move the results page.