149
10.6.3 Administrator Name / Contact Information
In this area, the user can set the contact information for the administrator.
10.6.3.1 Top Page
10.6.3.1.1 Image
Figure 10-72 Contact Information Settings
10.6.3.1.2 Setting Items
The following table shows the items on the page..
Table 10-191 Setting Items
10.6.3.1.3 Button
The following table shows the buttons on the page.
Table 10-192 Button
10.6.3.2 Result Page
The result message is shown in the main frame or in an error pop-up after the “OK” button is pressed.
10.6.3.2.1 Result
Table 10-193 Result
"Administrator Name/Contact Information"
Text box for entering contact information
Usable string: UTF-8 code, Max. of 255 bytes.
Button at the bottom of the main frame
This message is shown when the settings are completed.
This message is shown if setup fails.
"Invalid value below."
" – Administrator Name/Contact Information"
Shows an error pop-up when a value is entered incorrectly.
Setting Items
Button
To Next Page
Loading...
