Epson TM-P20II Reference Guide

156
10.6.4.4 Time Server
10.6.4.4.1 Models that Support Node.js
10.6.4.4.1.1 Top Page
10.6.4.4.1.1.1 Image
The following figure shows the layout of this settings area.
Figure 10-79 Time Server Settings
10.6.4.4.1.1.2 Setting Items
The following table shows the items on the page.
Table 10-205 Time Sever Settings
10.6.4.4.1.1.3 Button
The following table shows the buttons on the page.
Table 10-206 Button
When the “OK” button is pressed, Web Config displays a pop-up window with the following message if it recognizes an error in
the entered value.
Table 10-207 Error Pop-up
Items
Description
Condition
"Use Time Server"
You can choose whether to use a time server.
"Use" / "Do Not Use"
-
"Time Server Address"
Enter an NTP server address by IP address or FQDN.
Enabled if "Use" is
chosen in "Use Time
Server"
"Update Interval (min)"
Set the interval for updating the time on the printer.
Enabled if "Use" is
chosen in "Use Time
Server"
"Time Server Status"
Shows the latest connection status between the printer and
the server.
"Completed synchronizing" / "Synchronizing" / "Failed to
synchronize" / "Disable"
Enabled if "Use" is
chosen in "Use Time
Server"
Items
Description
"OK"
- Button at the bottom of the main frame for configuring settings.
Items
Description
"Invalid value below."
"-Time Server Address"
"-Update Interval(min)"
Shows a warning when a value is entered incorrectly.
Setting Items
Button

Epson TM-P20II Specifications

General

Brand	Epson
Model	TM-P20II
Category	Printer
Language	English