157
10.6.4.4.2 Progress Page
The progress page indicating a sandglass is shown in the beginning when the Start button is pressed.
On the progress page, the Web Config checks to see if the Refresh button is pressed and if the setup is completed periodically and
makes transition to the Results page if the setup is completed or remains the current page if the setup has not been completed.
10.6.4.4.2.1 Image
Figure 10-80 Progress Page
10.6.4.4.2.2 Button
Table 10-208 Button
The button on bottom of the main frame to refresh the page.
Button
To Next Page
Loading...
