76
10.4.2.3 Result Page
After the “Import” button is pressed, the top page is shown in the main frame if importing is successful.
After the “Import” button is pressed, the result is shown in the main frame if importing fails.
10.4.2.3.1 Image
Figure 10-25 Result Page
10.4.2.3.2 Setting Result
Table 10-60 Result
Note: If the size of a certificate to be imported is larger than 24KBytes, the device is unable to read it and a Web browser error is
shown.
This message is shown in the following cases.
- The file uses an incorrect format or wrong interrelation.
- The file size is greater than the stipulated range of 5k to
This message is shown when an expired certificate is
imported, and the date and time are not set.
"The certificate has expired. Check if the certificate is valid, or
check the date and time on the product."
This message is shown when an expired certificate is
imported, and the date and time are already set.
"Restarting communication may take a few minutes."
"If you want to change the settings, close the Web Config
and check your IP address. Then enter your IP address in the
browser to restart the Web Config."
This message is shown when network rebooting is
successful.
This message is shown when importing or network
rebooting fails.
Setting Result
To Next Page
Loading...
Need help?
General