35
9.7.5.2 Setting Result
Table 9-30 Setting Result
9.7.5.3 Button
Table 9-31 Button
9.8 Advanced Setting Link
Press this button to display “Product Status” of the “Status” tab.
"Do not turn the product off."
"When the update is complete, the product turns off and
on automatically.¥n
If you turn the product off while updating, it may
function abnormally. Restart the Web Config on browser
This message is shown when the firmware update is started
successfully.
The ! icon is shown in front of "Do not turn the product off. ".
"The firmware update was canceled."
This message is shown when the firmware update is canceled
successfully.
"You have the latest firmware."
This message is shown when the current version of the
firmware is the most recent.
"Cannot connect to the Epson server."
This message is shown when the printer could not access the
server.
The X icon is shown in front of the string.
"Cannot update the firmware."
"Quit printing or scanning."
"Remove the roll paper if loaded."
"When an error message appears on the screen or status
lights indicate an error, solve the problem."
"Note: There might be an error regarding the
consumables such as ink supply units."
"Remove the memory card."
"If the problem is not solved, close the Web browser and
This message is shown when the printer cannot update the
firmware.
The X icon is shown in front of "Cannot update the firmware. "
"Remove the roll paper if loaded. " is shown on destinations
with roll paper feed.
"Another computer may be communicating with the
This message is shown when another computer may be
communicating with the product.
The X icon is shown in front of "The operation failed. ".
"Cannot update the firmware."
"Low battery. Connect to a power source."
This message is shown when processing cannot be executed
because the power is not connected and the battery level is
low.
The X icon is shown in front of "Cannot update the firmware. "
Changes to the main page.
To Next Page
Loading...
Need help?
General