Epson TM-P20II

72
10.4.1.3 Result Page
10.4.1.3.1 Image
Figure 10-22 Result Page
10.4.1.3.2 Setting Result
Table 10-50 Setting Result

Items
Description
"Shutting down."
"Restarting communication may take a few minutes."
"If you want to change the settings, close the Web Config and
check your IP address. Then enter your IP address in the
browser to restart the Web Config."
-This message is shown when the settings are
completed.
The network shuts down in order to update.
"Setup failed."
- This message is shown if the settings fail.
Setting Result