Epson TM-P20II

158
10.6.4.4.3 Result Page
As soon as the result is determined, the following result message is shown in the main frame.
10.6.4.4.3.1 Image
Figure 10-81 Result Page
10.6.4.4.3.2 Setting Result
The result is shown below.
Table 10-209 Result
Items
Description
Condition
"Setup complete"
This message is shown when the settings are
completed.
-
"Connection failed"
"Check the settings"
This message is shown if the connection fails.
-
"Time server disabled"
This This message is shown if you disable the server.
-
"Cannot access the product until
processing is complete."
This message is shown if the settings cannot be
configured because the device is busy.
-
"Date and Time"
Shows the current date and time in the stipulated
display format
If succeed
Result