Epson TM-P20II Reference Guide

159
10.6.4.4.4 Models that Do Not Support Node.js
10.6.4.4.4.1 Top Page
10.6.4.4.4.1.1 Image
The following figure shows a layout of this settings area.
Figure 10-82 Time Server Settings
10.6.4.4.4.1.2 Setting Items
The following table shows the items on the page.
Table 10-210 Time Sever Settings
10.6.4.4.4.1.3 Button
The following table shows the button on the page.
Table 10-211 Button
When the “OK” button is pressed, the Web Config displays a pop-up window showing the following message if it recognizes an
error in the input value.
Table 10-212 Error Pop-up
Items
Description
Condition
"Use Time Server"
You can choose whether to use the time server.
"Use" / "Do Not Use"
-
"Time Server Address"
You can input the NTP server address by IP address or FQDN.
Enabled if "Use" is
chosen in "Use Time
Server"
"Update Interval (min)"
You can set the interval for updating of the printer.
Enabled if "Use" is
chosen in "Use Time
Server"
"Time Server Status"
Shows the status of the most recent connection between the
printer and the server.
"Completed synchronizing"/"Synchronizing" /"Failed to
synchronize" / "Disable"
Enabled if "Use" is
chosen in "Use Time
Server"
Items
Description
"OK"
Button on the bottom of the main frame to perform setting.
Items
Description
"Invalid value below."
"-Time Server Address"
"-Update Interval(min)"
Shows a warning with the items of the incorrectly input value.
Setting Items
Button

Epson TM-P20II Specifications

General

Brand	Epson
Model	TM-P20II
Category	Printer
Language	English