Vlan ID Tag
Time To Live TTL value for inclusion in the IP header
Type Of Service ToS value for inclusion in the IP header
ASI Output <n> (Slot
<m>)
Selects ASI Output <n> on the ASI option card in slot <m>. If the ASI output is mirrored, then there is only
1 output per card.
Add New Transport Stream
Adds a new Transport Stream to the output. Displayed only if no
Transport Stream is defined for the ASI output.
Transport Stream ID: <id> Selects the Transport Stream with id <id> to modify its parameters.
Service List The list of services in the current Transport Stream.
Add Service Adds a service to the current Transport Stream.
Service <name>
Selects the service with <name> already added to the current
Transport Stream.
Component List Lists the components in the current service.
Add Component Adds a new component to the current service.
<Component name> on pid <pid>
Selects the component with <component name> and <pid> already
added to the current service.
Elementary Stream
The elementary stream associated with the component produced by
one of the VCM modules in the unit.
PID
The Packet Identifier that identifies the TS packets carrying the
current component.
Bit Rate Weighting
Fixed, Minimum, 2-20. The weighting associated to the current
component. A component with Fixed weighting does not respond to
changes in the Transport Stream Bit Rate. If Minimum is set for a
component, it will always use the minimum Bit Rate defined for the
video profile it is encoded with. A value 2-20 determines how much
a component is changed when the Transport Stream Bit Rate is
changed relative to other components with Bit Rate weighting other
than Minimum.
Service ID
The unique identifier of the current service within the current
Transport Stream.
PMT PID PID assigned to the PMT that describes the current service.
PCR PID
PID of the TS packets that carry the clock reference for the current
service. If the service has a component with the Embedded PCR
parameter set to On, this field contains the PID of that particular
video stream and it is read only.
SDT Parameters
Service Provider The name of the service provider as appears in the NIT
Service Name The name of the service as appears in the NIT..
Service Type Digital TV, Digital Radio, Teletext, Mosaic, Data Broadcast..
BISS Key Security key for Basic Interoperable Scrambling System (BISS).
Current State The Setmode state of the Transport Stream. Read only parameter.
To Next Page
Loading...
