SNTP Server The IP address of a time server in the network.
POIS Server URL Web address of the ??? server.
Reflex Version Selects the Reflex version to use for statistical multiplexing.
DPI TCP Port The port for the SCTE104 Slice messages to be transmitted.
Alarm Status
The overall alarm status of the unit. The same as indicated by the light pipe on the front
panel.
User Authentication
Enable On, Off. Determines whether authentication is required for controlling the unit.
User Name The user name used for authentication if user authentication is enabled.
Password The password used for authentication if user authentication is enabled.
Fan Speed Information Only
Fans Speed Control
Lowest Noise, Quiet, Cool or Best Cooling. Sets the fan speed to achieve the required
operation whilst maintaining a safe operating temperature within the unit.
Fans Speed Status Lists the speed of the respective fans in rpm.
Fan 1 4480 rpm
Fan 2 4608 rpm
Fan 3 4736 rpm
Fan 4 4736 rpm
Fan 5 4736 rpm
Voltage Rails Status Lists the actual voltage or current levels of the respective nominal outputs.
0.9V A
0.9V B
1.0V
1.0V GTP
1.2V GTP
1.2V
1.5V
1.8V
2.5V
2.5V Vcc Aux
3.0V
3.3V
3.6V
5V
To Next Page
Loading...
