Front Panel Parameters
LED Brightness Control 0-7. The brightness of the keys and the rotary knob.
Video Monitor Preview Time
The time in seconds after which the TND is to be turned off automatically. If 0 is given
as value, the TND does not turn out automatically.
Video Monitor Usage Time The cumulative time the TND was switched on.
Video Monitor Brightness 0-7. Sets the brightness of the TND (CMU) display.
Key Lock Time
The time in seconds after which the keyboard gets locked to prevent accidental key
presses.
Default Screen on Key Lock
When set to on the menu will return to default screen. Set to off to remain on current
screen after timeout lock.
Default Screen Type Classic – enables the scrolling status information
Alternative disables the scrolling status
TSDT Setup Transport Stream Description Table setup.
Usual Station Code
SNG HQ
SNG Provider
Third Party Control Interface
Enable Third Party Control API On/off.
Remote Server Logging
Remote Server IP Address
The IP address to which system messages selected for remote logging are sent. A
value of 0.0.0.0 disables all remote logging.
Alarm Logging Off, On. When set to On, all alarm log messages are copied to the remote server.
ESAM Logging Off, On. When set to On, all ESAM log messages are copied to the remote server.
SCTE-35 Logging Off, On. When set to On, all SCTE-35 log messages are copied to the remote server.
User Configuration Logging Off, On. When set to On, all user configuration changes are sent to the remove server.
Reflex Parameters
PCR Port The UDP port on the current unit to which PCR Exchange Messages are sent.
Command port The UDP port on the current unit to which Set Rate Messages are sent.
Status Port
The UDP port on the multiplexer to which Status Messages are sent from the current
unit.
PCR Exchange Timeout Period
The maximum time between PCR Exchange Messages. If exceeded, PCR Exchange
Timeout Alarm is triggered.
Reflex TTL
The time to live value to be applied to all Reflex v5 messages transmitted from the
current unit.
Set Rate Timeout Period
The maximum number of video frames between set rate messages. If exceeded, Set
Rate Message Timeout Alarm is triggered.
MGP Support
Supported MGP Version The MGP version supported by the unit. Read only parameter.
To Next Page
Loading...
