Logo file
The file to use as a logo. The selected file can be uploaded by selecting the
Upload option.
Logo insertion
On, off. Controls if logos are displayed or not. The file to use can be selected
under Logo file.
A fixed logo position?
On, off. Controls whether to use the default position for overlaying the logo on
the video. On means use the position as contained in the logo file. Off allows
the user to select the X,Y location of the logo.
The X position of the logo
The position relative to left of the screen 0 (number of pixels per video line -
logo width - 1). If an invalid position is specified, a logo display alarm will be
generated. Displayed only if a fixed logo position is set to Off.
The Y position of the logo
The position relative to top of screen 0 (number of video lines - logo height - 1).
If an invalid position is specified, a logo display alarm will be generated.
Displayed only if a fixed logo position is set to Off.
Upload New Slate File
The file to use as a Slate. The selected file can be uploaded by selecting the
Upload option.
Slate File Enables selection of slate file to be uploaded.
HD to SD Video Down-conversion Control over conversion from HD to SD pictures.
Default Aspect Ratio Conversion Anamorphic, Center cut, Letterbox.
Use Input AFD True, false.
Action on AFD lost Convert as anamorphic, Convert as specified in Default.
Action on AFD code 0000 Convert as anamorphic, Convert as specified in Default.
VBI Extraction
Descriptor Control
VBI Descriptor Mode
Standard, Legacy, Philips, User. Controls the descriptor mode to be used for
the VBI PID. Used in conjunction with the Teletext packetization parameter.
VBI Data Descriptor Insertion Off, on.
VBI Teletext Descriptor Insertion Off, on.
Teletext Descriptor Insertion Off, on.
Proprietary Descriptor Insertion Off, on.
Aspect Ratio (AR) Signalling
Video Index
Off, On (Default), On (User). Controls the extraction of Video Index (and thus
whether Video Index can be used as source of AR info).
Default: The default lines will be set to decode Video Index (11/324 in 25Hz,
14/277 in 29.97 Hz)
User: The User defines the lines used to decode Video Index.
Video Index Field 1 10 to 22. Specifies which line contains the video index in field 1.
Video Index Field 2 10 to 22. Specifies which line contains the video index in field 2.
SMPTE 2016
On, off. Controls whether SMPTE 2016 data can be used as a source for AR
info.
AFD Sustain Indefinitely, Default after Timeout, Off after Timeout.
Control what AFD code goes out when AFD is lost at input.
To Next Page
Loading...
