AS Index Control
Don't Care, Use 1, Use 1 + 2. Only available when Splicing Control is set to On
VANC Message Only.
If set to Don’t Care, the AVP 4000 will create SCTE 35 output regardless of the
source Automation System.
If set to Use 1, the AVP 4000 will create SCTE 35 output only for incoming
SCTE 104 whose AS Index matches the setting in AS Index 1.
If set to Use 1 + 2, the AVP 4000 will create SCTE 35 output only for incoming
SCTE 104 messages whose AS Index matches either the setting in AS Index 1
or the setting in AS Index 2.
DPI PID Index Control
Don't Care, Use 1, Use 1 + 2. Determines how many values of DPI PID Index
are compared against the incoming SCTE 104 message. Available only when
Splicing Control is set to On VANC Message Only.
AS Index 1 0 to 255. The AS index used if AS Index Control is set to Use 1 or Use 1 + 2.
AS Index 2 0 to 255. The AS index used if AS Index Control is set to Use 1 + 2.
DPI PID Index 1
0 to 255. The DPI PID index used if DPI PID Index Control is set to Use 1 or
Use 1 + 2.
DPI PID Index 2 0 to 255. The DPI PID index used if DPI PID Index Control is set to Use 1 + 2.
Splice Status
Scte104 Messages In
Scte104 Message Error
Scte 35 Messages Out
Pending Splices.
Splice Event Info
Splice <n>
Splice Type
Out of Network
Unique Program ID
Event ID
Time to splice (H)
Time to splice (M)
Time to splice (S)
Time to splice (F)
Stream Output
Embedded PCR
Off, On, On (Picture Header). Sets if the PCR is embedded within the video. If
it is set to other than Off, the PCR PID field of a service will become read only
and will contain the PID of the current component.
Copyright Off, On. Sets the copyright flag in the elementary stream header.
Original Off, On. Sets the original flag in the elementary stream header.
PES Packet Per
GOP, Picture. Determines how PES packets shall be generated. The Picture
option is only available if MPEG 2 encoding is used.
To Next Page
Loading...
