AU Information Ctrl
Off, RAI, RAI and AU Info. Controls insertion of Private Data in the TS
Adaptation Field for video Access Units (AU). This can be: Random Access
Indicator (RAI), ETSI 101 154 (AU info), Time Code (TC) and Additional Info
(Encoding info and BroadcasterID).
AR Signalling Output Control
Off, AFD Only, AFD and Bar Data. Controls what Aspect Ratio signaling will be
put into video user_data. AFD sources are: SMPTE 2016, Video Index, WSS-
AFD/WSS, user set Aspect Ratio. Bar Data is only SMPTE 2016.
TC Output Location
SeqHdr, SeqAndPicHdr, Off, SEIMsg. Determines the locations used to
transmit Time code information in the stream. Time code can be carried by the
sequence header, the sequence and picture headers for MPEG-2 or a SEI
message for H.264.
Reflex
Reflex Configuration
Enable Reflex Off, On. License controlled.
Media SetMode
Reflex destinations
Both destination
Mux Multicast
Address
Main Mux Source IP
Address
Spare Mux Source
IP Address
Enc Multicast
Address
Tracking Encoder
Source IP Address
TS Source IP
Address
Tracking Encoder Source IP
Addr
Tracking Encoder Control IP
Addr
Tracking Encoder Module ID
Video PID
PCR PID
Reflex Transport Stream ID
Internal Reflex Component
Parameters
Max Seamless Bit Rate
Interval Reflex Group ID
Reflex Status
To Next Page
Loading...
