5.5.4.1.1 General Transport Stream Settings
The general Transport Stream parameters are available in the Properties widget on
the Service Configuration page if a Transport Stream is selected in the Outputs
widget. The same settings are also available through the front panel under
Output/<interface name>/<Transport Stream name>.
Table 5.59 General Transport Stream Settings
Parameter Values Description
Status of Service Online, Offline, Preview, Retire
Determines the output (Setmode) state of the Transport
Stream.
Bit rate 0.01 to 216 Mbps Bit rate of the emission transport stream.
Reserved Bit rate -216 to +216 Mbps
Reserve bit rate in the transport stream that will not be
consumed by services or components.
Auto Enable True; False
Automatically resume emission of the TS if the event
causing automatic disable has cleared.
Auto Disable
Never; Audio Lost; Video Lost; Audio or Video
Lost; Any CRITICAL alarm
Automatically stop emission of the TS in the event of the
selected event.
Syntax ATSC; DVB
Which syntax to be used in the TS, descriptors and
tables.
External Generation Off External generation of PSI tables, ATSC only.
Program Specific Information
Transport Stream ID 1 to 65535 ID of the transport stream as it appears in the NIT.
PAT/PMT On; Off Generate PAT and PMT if selected.
CAT Off; On Conditional Access Table generation.
TSTD Off; On
Generation of the TSTD table. Selection only available
for DVB syntax.
PAT/PMT Parameters
PMT Repetition Period 100; 400; 500 milliseconds How often to transmit the PMT
Dolby Digital Descriptor DVB; ATSC; DVB & ATSC
Format of the Dolby Digital Descriptor in the PMT, if
present. Selection only available for DVB syntax.
Service Information
Original Network ID 1 to 65535
ID of the originating network. Selection only available for
DVB syntax.
NIT Off; On
Network Identification Table. Selection only available for
DVB syntax.
TDT Off; On
Time and Date Table. Selection only available for DVB
syntax.
EIT Off; On
Event Information Table generation. Selection only
available for DVB syntax.
SDT Off; On Service Description Table.
NIT Parameters
Network Name string
Free field string for the Network name to be sent in the
NIT.
To Next Page
Loading...
