Estun Summa Series - Page 213

Summa Series Servodrive Product Manual
Tuning
Document Version: V1.01
(Dec, 2019)
© 2019 ESTUN Automation Co., Ltd. All right reserved.
9-16
Step 5 Set the relevant parameters for the operation patterns POS0 and POS1.
 Rotation Number: Set the numbers of rotation the Motor will run in the operation pattern POS0 or
POS1.
 Rotation Speed: Set the Motor running speed in the operation pattern POS0 or POS1.
 Stop Time: Set the hold time when the Motor stops running in the operation pattern POS0 or POS1,
and then switches to the other operation pattern.
Step 6 Click Apply to complete the settings.
Step 7 Click Running Tuning.