Estun Summa Series - Environmental Conditions

Summa Series Servodrive Product Manual
STO
Document Version: V1.01
(Dec, 2019)
© 2019 ESTUN Automation Co., Ltd. All right reserved.
11-4
Applicable Standards
The safety standards followed by STO are shown in the table below.
Item
Safety Specification
EMC Directive

IEC 61800-3: 2017

IEC 61000-4: 2017

IEC 61326-3-1: 2017

IEC 61800-5-2: 2016
Low Voltage Directive

EN 61800-5-1: 2007 + AMD1:2017
Functional Safety

IEC 61800-5-2: 2016

IEC 60204-1: 2016

IEC 61508: 2010

IEC 62061: 2015

ISO 13849-1: 2015
Environmental Requirements

IEC 60068-2-1: 2007

IEC 60068-2-2: 2007

IEC 60068-2-6: 1995

IEC 60068-2-14: 1984

IEC 60068-2-27: 1987

IEC 60068-2-78: 2001

IEC 61800-2: 2015

IEC 61800-5-1:2007 + AMD1:2016
11.2 Environmental Conditions
Item
Specification
Operation
Temperature: -5℃ to 55℃
Humidity: 5% to 95% RH (with no condensation)
Storage
Temperature: -20℃ to 85℃
Humidity: 5% to 95% RH (with no condensation)
Altitude
≤1000m (Rated); ≤2000m (Derated)
IP
IP20
Pollution Index
II
Overvoltage Category
III
Isolation Voltage
Input to Output: 2 kV; Input to Earth: 2.7 kV
Insolation Resistance
50 VDC, 50 mΩ or more
CAUTION

To avoid the risk of crosstalk to signal cables, please segregate the
power interface cable from signal cables or state alternative mitigation
methods.

It is not recommended to use the device in public low voltage power
supply systems.